ChangJiang 24 hp

Crank case – cylinders. 6 volt

Wrench for cylinder head bolt, square head
Specification
  • Age: New
Show details
Spring, crank case ventilation CJ 6 v
Specification
  • Age: NOS
Show details
Crank case CJ sidevalve 6 volt
Description
NOS vevhus. Kan användas för M72 men då måste ChangJiang registerbröst mm användas.
Specification
  • Age: NOS
Images & Documents
Show details
Bearing holder CJ 6v
Specification
  • Age: NOS
Show details
Gasket distributor distributor w manual ignition advance setting
Specification
  • Age: NOS
Show details
Screw M6 x 16, counter sunk head
  • 0,60 €
  • Out of stock
  • 003304
  • New
Specification
  • Age: New
Show details
Stud M8 x 80 for cover
Specification
  • Age: New
Show details
Stud M6 for valve pusher holder
Specification
  • Age: New
Show details
Stud bolt M8 x 42
Description
On end M8 x 1,0, the other m8 x 1,25
Specification
  • Age: New
Show details
Stud M10 x 45 for cylinder
Specification
  • Age: New
Show details
Set studs etc for cylinders
Description
For sidevalves M72-K750-CJ. 4 x studs 8 mm, 8 x studs 10 mm + washers and nuts. Galvanised steel.
Specification
  • Age: New
Show details
Papergasket set M72, K750 and ChangJiang 24 hp. Engine, gearbox, differential. NB only papergaskets
  • 24,40 €
  • Out of stock
  • 01.26
  • New
Description
Contains: 7201159 2 st, 7201161, 7201162, 7201164, 7201303 2 st, 7201308 2 st 2 mm, 6204129, 7204128, 7204131, 75004130 (7204130), 7204140, 7205107
Specification
  • Age: New
Show details
Engine gasket set M72-K750, K750M and CJ 24 hp. (EU) No head gaskets
Description
Contenu: 7201159 2 pcs, 7201161, 7201162, 7201163, 7201164, 701303 2 pcs, 7201422 4 pcs, 7201611, PM-0501and gasket between crank case and bearing set for camshaft bearing
Specification
  • Age: HQ
Show details
Copper washer 14x20x1,5
Specification
  • Age: New
Show details
Woodruff-key 3x13x5 mm
Specification
  • Age: New
Show details
Set glands and rubber seals engine - gearbox, final drive ChangJiang 24 and 32 hp
  • 24,40 €
  • Out of stock
  • 02.19
  • New
Description
Contains: 7201122, 75001136, 7204122-A, 7204147 2 pcs, 7204152, 7204157, 7205113-b, 7205334 and seals for push rod tubes
Specification
  • Age: New
Show details
Heat insulating spacer f carburettors 4 mm
  • 4,60 €
  • Out of stock
  • 02.43
  • HQ
Description
Fibre reinforced bakelite.To be used with thin paper gaskets or gasket sealant on both sides of the spacer.
Specification
  • Age: HQ
Show details
Cylinder set M72, K750 and CJ 24 hp. Pair.
Description
Only cylinders. Produced in China, ok modern production.
Specification
  • Age: New
Images & Documents
Show details
Cylinder set complete M72, K750 and CJ24 hp. Pair.
  • 660,00 €
  • Out of stock
  • 02.51
  • New
Description
Cylinders with valves and EU quality pistons. Piston pins 21 mm. Cylinders are produced in China, nice modern production. Valves in standard quality. Ready to use.
Specification
  • Age: New
Images & Documents
Show details
Cylinder set M72, K750 and CJ24 hp. Pair. Cylinders, valves and piston set
Description
Cylinders with valves and EU quality pistons. Piston pins 21 mm. Cylinders are produced in China, nice modern production. Valves in standard quality. Valves have not been ground, made by the buyer.
Specification
  • Age: New
Show details
Bolt engine-gearbox
  • 1,73 €
  • Out of stock
  • 200274
  • New
Description
M8 x 75 mm. Zinc plated steel
Specification
  • Age: New
Show details
Bolt
Specification
  • Age: New
Show details
Ball bearing 6205 C3, 25x52x15 C3 SKF
Specification
  • Age: HQ
Show details
Screw M6 x 30
Description
6 pcs on register chest
Specification
  • Age: HQ
Show details
Screw M6 x 45
Description
4 pcs on register chest
Specification
  • Age: New
Show details
Nut M8x1. 13 mm wrench
Description
Förzinkad
Specification
  • Age: New
Show details
Nut M8x1,0. 13 mm wrench
Description
For 14 mm wrench, as used on older motorcycles
Specification
  • Age: NOS
Show details
Nut M10x1,0 (EU)
Specification
  • Age: New
Show details
Ball bearing 35x72x17, 6207 C3 Timken
Description
More axial play than standard bearing, essential for use in russian engines.
Specification
  • Age: HQ
Show details
Camshaft
Description
Fits all sidevalves, but made to M72 specs, a bit lower lift than original K750.
Specification
  • Age: NOS
Show details
Register cover M72-CJ, with breather
Specification
  • Age: New
Show details
Bush for camshaft
Specification
  • Age: New
Show details
Evacuation tube M72 etc
Description
M72, K750, M61 ChangJiang
Specification
  • Age: NOS
Show details
Holder distributor
Specification
  • Age: New
Show details
Gasket for register cover
Description
short description
Specification
  • Age: New
Show details
O-ring 6 v generator -engine
Specification
  • Age: New
Show details
Cover ignition M72-CJ
Specification
  • Age: New
Show details
Disc for gear on crank
Specification
  • Age: New
Show details
Lock washer
Specification
  • Age: New
Show details
Cylinder MK, right
Description
M72-K750 and ChangJiang 24 hp, right. Produced in China, ok quality.
Specification
  • Age: New
Show details
Cylinder MK, right
  • 195,00 €
  • Out of stock
  • 72013-2
  • New
Description
M72-K750 and ChangJiang 24 hp, left. Produced in China, ok quality.
Specification
  • Age: New
Images & Documents
Show details
Cylinder base gasket ChangJiang
Specification
  • Age: New
Show details
Cylinder base gasket ChangJiang
Specification
  • Age: New
Show details
Cylinder base gasket, (EU)
Description
For sidevalve engines M72, K750, ChangJiang 22-24 hp etc
Specification
  • Age: HQ
Show details
Bolt for cylinder head
Description
NB, four sided head
Specification
  • Age: New
Show details
Carburettor base gasket 4 mm
Specification
  • Age: New
Show details
Carburettor base gasket 0,4 mm
Description
Paper gasket 0,4 mm
Specification
  • Age: NOS
Show details
Carburettor base gasket 2 mm
Specification
  • Age: New
Show details
Bearing body
Specification
  • Age: New
Show details
Register gears, camshaft +crank
  • 72,18 €
  • Out of stock
  • 7201406 + 7201229
  • NOS
Description
For all M72, K750, K750M, Ural 650. Good NOS quality. NB! Not for ChangJiang 12 volt.
Specification
  • Age: NOS
Images & Documents
Show details
Collar for tappet
  • 7,12 €
  • Out of stock
  • 7201410
  • NOS
Specification
  • Age: NOS
Show details
Valve lifter
Specification
  • Age: NOS
Show details
Valve adjustment screw + nut
Description
Good NOS quality
Specification
  • Age: NOS
Show details
Holder for valve pusher
Specification
  • Age: New
Show details
Valve M72-K750-CJ 9,05 mm
  • 25,42 €
  • Out of stock
  • 7201416-9.05
  • HQ
Description
Oversize 9,05 mm. High quality. Fits all sidevalves: M72, K750-M, MW750, MT12 and ChangJiang.
Specification
  • Age: HQ
Show details
Valve, sidevalve engines, 9 mm. High quality
Description
Standard size stem 9 mm. High quality. Fits all sidevalves: M72, K750-M, MW750, MT12 and ChangJiang.
Specification
  • Age: HQ
Show details
Valve block, 2 pcs
Specification
  • Age: NOS
Show details
Disc for valve spring MK
Description
M72, K750 and CJ750
Specification
  • Age: NOS
Show details
Valve spring
Specification
  • Age: NOS
Show details
Cylinder head, right
Description
As original on M72 (Irbit) but fits all sidevalves. Rough finish but does it's job. Produced in China.
Specification
  • Age: New
Images & Documents
Show details
Cylinder head, left
Description
As original on M72 (Irbit) and ChangJiang, but fits all sidevalves. Rough finish but does it's job.Made in China.
Specification
  • Age: New-
Show details
Cylinder head gasket 1,5 mm copper-fibre
Description
All sidevalves, M72, K750, MT12 and CJ. Extra thickness, suitabe for uneven surfaces.
Specification
  • Age: New
Show details
Cylinder head gasket 0,5 mm aluminium
Description
For all sidevalve models.
Specification
  • Age: New
Show details
Cylinder head gasket 0,5 copper
  • 4,07 €
  • Out of stock
  • 7201504 cu
  • NOS
Description
For all sidevalve models, M72, K750, MT12 and CJ 24 hp
Specification
  • Age: NOS
Show details
Cylinder head gasket 1,0 mm copper-fibre (EU)
  • 20,33 €
  • Out of stock
  • 7201504 HQ
  • HQ
Description
All sidevalves, M72, K750, MT12 and CJ. Extra thickness, suitabe for uneven surfaces. Copper ring around the combusition chambre. High quality, made in EU.
Specification
  • Age: HQ
Show details
Upper engine bracket M72 - ChangJiang
  • 9,66 €
  • Out of stock
  • 7209167
  • New
Specification
  • Age: New
Images & Documents
Show details
845
864